SIMstarter NG

FSX/FSX:SE/P3D
Téléchargement
12,56 € *

Prix excl. TVA

Disponible en tant que téléchargement immédiat

  • AS13765
  • Aerosoft
  • Peter Rosendahl
  • German/English
  • 1.6.4.12
SIMstarter NG is a start-up and configuration manager for the flight simulator. You can create...plus
Informations sur le produit "SIMstarter NG"

SIMstarter NG is a start-up and configuration manager for the flight simulator. You can create various configuration profiles and start them via simple mouse click. If you want to show more details for a visual flight, and if you have to reduce this for a flight with a large, complex commercial aircraft for performance reasons, this can simply be done via different start profiles.

That’s the point where SIMstarter NG comes in: NG can create different profiles for different scenarios. For a „low and slow“ VFR flight you put a profile with higher LOD, greater scenery density, turn on car and boat traffic, general aviation traffic high, add two cloud layers more at the Weather Engine Active Sky Next and switches on all nice, small airfields and gimmicks at the Scenery Library (Scenery.cfg). But for the „Heavy metarl“: car and boat traffic off, IFR traffic up , General aviation Traffic down , disable small airfields, because Airbus X won’t be able to land there and chart tools simultaneously.

Over the years, SIMstarter NG has also established itself as a very strong configuration editor. So you can easily change and manage various configuration files of the simulator with a graphical interface. Many well-known tweaks are already preset and only have to be set.

Overview:

  • Management of up to 99,999 profiles per simulator platform
  •  Several simulators can be used in parallel
  • Graphical administration of sceneries, SimObjects and other configuration settings
  • Various programs can be stored and started automatically with each profile start
  • Unused software can be closed automatically to save resources
  • All installed airports can be viewed in Google Earth for a better overview
  • Integrated backup of the configuration files
  • User settings are logged, so you can keep track of changes
  • Multilanguage interface (english/german)

Features:
PROFILES

  • Profiles can be created, edited or deleted
  • Different configuration settings can be assigned to each profile
  • Profiles can be started at the click of a mouse
  • You can assign different „Splashscreens“ to each profile
  • The aircraft, parking position and date can be selected before starting (**)
  • Saved flights can be loaded directly and displayed in Google Earth (***)
  • The time can be set before starting the simulator. The system time can also be used
  • Flight plans can be loaded directly (also automatically the last saved flight plan)
  • A METAR / TAF dialog informs about the current weather
  • Different control profiles can be loaded
  • Programs that are not required can be stopped and restarted automatically after the simulator has been terminated
  • Different FSUIPC configuration files can be loaded for each profile
  • Integration of the freeware „Autogen Configuration Merger“
  • HIFI „Active Sky“ can be started automatically with different configurations

ADD-ON.XML MANAGER (P3D V4)

  • Creates, edits and removes add-on.xml files for PREPAR3D
  • Displays all available add-on.xml files graphically
  • Add-on.xml files can also be created automatically from a directory structure
  • The add-ons can be assigned profiles so that only the add-ons that are required are started in a profile

SIMULATOR CONFIGURATIONMANAGER

  • Almost all configuration settings in the simulator can be adapted in configuration profiles (ConfigSets)
  •  As well as other configuration settings and tweaks that are not visible in the simulator
  • These different settings can be assigned profiles so that different settings are applied to each profile
  • Graphical editing of fsx.cfg / prepar3d.cfg file

SCENERY CONFIGURATIONMANAGER

  • Sceneries can be added, modified, or removed in a graphical interface
  • You can create „Scenery Spacer“, which makes the scenery library more transparent
  • Several sceneries from a directory structure can be added automatically
  • Sceneries can be assigned to profiles and thus become active only when they are really needed
  • Graphical editing of the scenery.cfg file

START MANAGER

  • A list of programs to start with the simulator
  • Programs can be added, edited, or removed from the list
  • The CPU priority and the cores used can be set for each program
  • Program can be closed automatically after completing the simulator
  • Program can not be started until the aircraft has been loaded (*)

SIMOBJECTS CONFIGURATIONSMANAGER

  • SimObjects can be added, modified or removed
  • SimObjects can be assigned profiles to load profile-specific objects only, which are also required
  • Graphical editing of the simobjects.cfg file (or [SIMOBJECTS] section in the FSX)

DLL/EXE.XML CONFIGURATIONSMANAGER

  • Entries can be added, edited, or removed
  • All settings can be edited comfortably by mouse click
  • Graphical editing of dll.xml and exe.xml files

ACTIVE SKY CONFIGURATIONSMANAGER

  • Support for Active Sky Next, Active Sky 2016 and Active Sky 2016 P3D V4
  • Different configuration settings for Active Sky could be added, edited, or removed
  • The configuration profiles are available in the profiles so that different weather settings can be made for each profile

LIVERY MANAGER

  • Maintains aircraft and its paintings
  • Aircraft can be sorted, activated or deactivated
  • The Livery Import can be used to add third-party aircraft painting to many aircraft

START POSITION

  • The starting position of the aircraft can be selected before starting the simulator (**)
  • The gate or parking position can also be filtered according to airline codes
  • Also the METAR / TAF for the destination airport can be displayed

FILESWITCHER

  • The Fileswitcher is a tool, which can rename files in „.off“. These files are no longer used in the simulator. Time and again, scenarios require that certain files are deactivated, which can be done with the Fileswitcher simply by clicking
  • All file changes are logged. So you always see which file was renamed. Changes are therefore easy to undo
  • Presets are available for many airports (ORBX Germany North / South, etc.)

AFFINITY CALCULATOR

  • Many simulator platforms and systems benefit from the setting „AffinityMask“
  • In the Affinity Calculator, the value can be determined comfortably by clicking
  • Errors are let because the graphical interface only displays the cores that are also available

MAKERUNWAYS SUPPORT

  • Supports the freeware MakeRwys by Pete Dowson
  • (P3D V4) also includes sceneries from add-on.xml files

AIRPORTS IN GOOGLE EARTH (***)

  • All installed add-on airports can be displayed in a Google Earth map. So you have a nice overview of the installed airports

SAVED FLIGHTS IN GOOGLE EARTH (***)

  • It can display all saved flights in a Google Earth map. So you can see at a glance, where the fleet is „parked“


(*) This function requires the freeware version of FSUIPC
(**) For some complex Add-On aircraft, a standard aircraft must be selected here
(***) Requires the free version of Google Earth


Awards / Reviews:

Conclusion by mutleyshangar.com:
"...once you have mastered SIMstarter NG, you may never go back to the standard way of running you sim. The program is immensely powerful, and with the added features like CleanDesk and the autorunning, Orbx region setup and Active Sky Next configuration included in the program itself, it is hard to imagine ever not using it."


Read review


System requirements:
Microsoft Flight Simulator X (with SP2), FSX: Steam Edition or Lockheed Martin - Prepar3D V2.4 - V4.1
Windows 7 / 8.1 / 10 (all fully updated and preferably 64 bits)
2.0 GHz processor (Intel Core 2 Duo highly recommended)
8 GB RAM internal memory
2 GB graphic card (3 GB highly recommended)
PDF reader for manual
Download-Size: 20 MB

Internet connection is required!

Liens supplémentaires vers "SIMstarter NG"

Version 1.6.4:

  • [FEATURE] GoogleEarth - Google Earth Export Excludes verbessert; Klicken Sie dazu auf Settings > Google Earth Export Settings > Klicken Sie den "Reset" Button in der linken unteren Ecke des Dialogs
  • [BUGFIX] Flugzeuge - Auto-Update wurde in einigen Fällen nicht deaktiviert
  • [BUGFIX] SimConfig - (P3D V4) Weather Tab hatte falsche Reihenfolge; "Detailed Precipitation" und "Windshield Precipitation Effects" hinzugefügt
  • [BUGFIX] SimConfig - (P3D V4) BroadcastGPSData Option hinzugefügt

Version 1.6.3:

  • [FEATURE] Aircrafts - Auto-Update der Flugzeugliste kann in "Settings" deaktiviert werden
  • [CHANGED] Startposition - ICAO Code ist jetzt großgeschrieben
  • [CHANGED] Startposition - Reihenfolge von Stadt und Land geändert
  • [CHANGED] GoogleEarth - Export basiert nun auf Scheme File
  • [CHANGED] Add-On.xml MGR - (P3Dv4) Fehlerbehandlung verbessert, wenn keine add-on.xml existiert, aber Teil von add-ons.cfg ist

Version 1.6.2:

  • [BUGFIX] MakeRwys - (P3Dv4) CTD, wenn Szenerie keine Ebene hat

Version 1.6.1:

  • [BUGFIX] RunManager - Klicken auf "Test" führt zu "file not found" Meldung
  • [BUGFIX] MakeRwys -  auf Version 4.8.3.5 aktualisiert
  • [CHANGED] MakeRwys - Logging verbessert
  • [CHANGED] DebugPack - (P3Dv4) Add-On.xml Dateien enthalten

Version 1.6.0:

  • Kompatibilität zu Prepar3D V4.1 wurde hinzugefügt
  • Ein neues SwitchSet wird automatisch gespeichert, bevor Daten gewechselt werden
  • Wenn eine .bgl and .offBySIMstarterNG Datei vorhanden ist, wurde die Datei als grün angezeigt (nicht der Fall, da .bgl links ist)

Version 1.5.0:

  • Mit P3D V4 voll kompatibel (arbeitet mit FSUIPC5)
  • P3D V4 kompatibel mit Active Sky 2016 für P3D V4
  • Add-On.xml MGR - (P3Dv4) Neuer Add-On.xml Manager zum Hinzufügen, Löschen oder Ändern der Add-On.Xml Files
  • Add-On CfgSets - (P3Dv4) ConfigSets für Add-On.xml Files stehen zu Verfügung
  • Scenery MGR - (P3Dv4) Zeigt Elemente der Add-On.xml Files - Ebenen können über GUI geändert werden
  • SimObjects MGR - (P3Dv4) Zeigt Elemente der Add-On.xml Files an
  • DLL/EXE.XML MGR - (P3Dv4) Zeigt Elemente der Add-On.xml Files an
  • ConfigSets können automatisch sortiert werden (Programmeinstellungen)
  • MakeRwys v4.7.0.0 enthalten (P3D V4)
  • SceneryMGR - HTML Export Highlights ScenerySpacer für besseren Überblick
  • SceneryMGR - Importieren mehrerer Szenerieelementen aus einem Quellpfad (Suche nach Szenerie-/Texturordnern)
  • Fileswitcher - SwitchSets können durch Drücken an- und ausgeschaltet werden
  • Startposition - Helipads hinzugefügt
  • Livery MGR geändert - Livery Import erinnert an zuletzt ausgewählten Importpfad
  • Scenery MGR geändert - ScenerySpacer wird im SimStarter NG Benutzerprofil-Verzeichnis gespeichert (keine AddOn Szenerie)
  • Startposition geändert - Flughafen AddOn Liste aktualisiert - arbeitet zusammen mit "Refresh Airports"-Taste
  • GoogleEarth korrigiert - hat den Dialog nicht installiert und erscheint bei jedem Öffnen des SimStarters
  • SimConfig korrigiert - Tooltip fehlte in einigen Fällen
  • SimObjects MGR korrigiert - (FSX/FSX:SE) Dialog stürzte ab, wenn Pfad schlechte Eigenschaften enthielt

 

German Airports 1 German Airports 1
  33,57 € *
Aerofly FS 2 Aerofly FS 2
  49,58 € *
Nice Côte d'Azur X Nice Côte d'Azur X
  15,08 € *
Bergamo Extended Bergamo Extended
  15,93 € *
MCP737PRO MCP737PRO
  999,00 € *
XPlane 11 XPlane 11
  57,84 € *
Twin Otter Extended Twin Otter Extended
  28,91 € *
Airport Toulouse Airport Toulouse
  16,52 € *